StarTech.com ICUSB2324X - Manual (Page 12)

Instruction Manual
9
Automatic Installation
Note: In order to ensure successful installation, please install the necessary software
(included) on the intended host computer prior to connecting the USB Serial Adapter
to the host.
1. Insert the Driver CD into the CD or DVD-ROM drive on the host computer.
2. Browse to, and execute the Setup.exe file.
3. When the installation progress launches, a welcome screen will appear. Click Next
to proceed.
4. You will be asked to select a destination where the StarTech.com Serial Adapter will
be installed. Please click on Browse to manually select a location. Otherwise, leave
the default destination in place and click Next.
5. Please wait while the necessary drivers are copied and installed.
6. Once completed, a message indicating that the drivers have been successfully
installed will appear. Please click Finish to conclude the software installation.
7. Connect the USB to Serial Adapter to the computer system. Windows will
automatically detect the device and install the drivers.
Verifying Installation
Windows
1. Open the Device Manager by right-clicking on Computer, and then select Manage.
In the new Computer Management window, select Device Manager from the left
window panel (For Windows 8, open the Control Panel and select Device Manager).
2. Expand the Ports section; you should see either a StarTech.com Adapter or a
TUSB3410 UART EVM device listed.
3. The port is automatically sequentially numbered by Windows, but can be changed
through the Properties by right-clicking on the port.