StarTech.com PM1115P2 Full - Manual (Page 21)

Instruction Manual
19
NetWare
1. Log into your NetWare file server as a Supervisor (Admin) or equivalent and
run PSAdmin.
2. Click the Wizard button from the PSAdmin tool bar.
3. Select NetWare Wizard from the window that opens and then click Next.
4. Select the NetWare File Server to which the print server device will be attached.
5. Type in a Print Queue name(s).
Note: Each print queue corresponds to each print port of the print server.
6. Click Ok.
7. From your NetWare client computer, create a printer that is connected (redirected)
to one of the NetWare print queues serviced by the print server.