StarTech.com R300WN22GAxx Full - Manual (Page 23)

Instruction Manual
18
Item Default Description
Pass Through Disable Enables or disables the pass through function.
Destination URL/IP Address Pass Through
URL or Website Empty
Enter the URL Page
(e.g. http://www.yahoo.com – Max 50 characters).
Start / End IP
Address
Empty Enter the range of IP address you want to allow.
Subscriber IP/MAC Address or LAN Device Pass Through
Start / End IP
Address
Empty Enter the range of IP address you want to allow.
IP Address
(single)
Empty Enter the IP address you want to allow.
Subnet Mask Empty Enter the subnet mask.
MAC Address Empty Enter the MAC address you want to allow.
Mask Empty Enter the subnet mask.
Pass Through List
No. - The index number of pass through address.
Active Disable
Click the check box to activate or deactivate the
pass through address.
Address List - Displays the pass through address(s).
Type - Displays the type of pass through address.
Delete -
Select the check boxes and click ‘Delete’ to delete
the pass through address(s).
Click the Delete All button to clear the list of all entries.
Filtering
The Filtering function allows you to maintain a list of restricted destinations, which can
be used to block access to specified Internet sites or intranet areas globally (applies to
Guest and Employee networks).