StarTech.com R300WN22GAxx Full - Manual (Page 21)

Instruction Manual
16
Item Default Description
SNMP Disable Disables or enables SNMP management.
SNMP Port 161
If SNMP is enabled, you can specify the
SNMP port number. The allowed SNMP
port numbers are 161 (default), or from
16100-16199 and Trap port numbers are
162 (default), or from 16200-16299.
This Port setting is useful for remote control
via NAT.
Trap Port 162
Configuration
Community Name Public/Private
Every unit with SNMP enabled must be
configured to recognize one or more
community names (up to 20 characters).
The default setting for the community of
entry 1 is “public” and for the entry 2 is
“private” and others are empty.
NMS Address ANY
The address of the Network Management
Station.
Privileges Read/Write
Choose “Read”, “Write”, “Trap Recipients” or
“All” for different privileges.
Status Valid/Invalid
Choose “Valid” or “Invalid” to enable /
disable the community entry. The default
setting of entry 1, 2 are valid and others are
invalid.