StarTech.com SATDOCK5U3ER - Manual (Page 13)

Instruction Manual
10
8.3 Upgrade Firmware
If an update to the device firmware is available on the StarTech.com product page,
this option can be used to update the device. The steps below outline the steps for
executing a system update.
Note:
A firmware update should only be done if recommend by StarTech.com.
The below steps should only be performed by advanced users. Please contact
StarTech.com Technical Support for assistance.
a) Connect the SATDOCK5U3ER to a computer system running windows XP/7.
b) Select advanced setup -> Upgrade Firmware (8.3) from the OSD menu.
c) A USB mobile Dis will now appear on your computer.
d) Copy the new firmware file to the disk.
The update will take place, and the on screen display will alert you upon
completion.
9. Link Host
The Link Host function, enables you to choose which host connection you would
like use in order to connect the device to your computer for docking mode, as well
as which drives are docked (Source (1) or Target (5)). The available options are listed
below:
USB Source To Host
USB Target To Host
ESATA Source To Host
ESATA Target To Host