Capacity check, Information – StarTech.com USBDUP15 User Manual

Page 11

Text mode
Original mode

Instruction Manual

4. Capacity Check

Check the exact capacity of the connected Flash drive in the destination slots.
1. Plug the Flash drive into the slot and press OK on Capacity Check. The system will

quickly report the exact capacity of the connected Flash drive by reporting either a

green or red LED. Use the up and down arrows to move between slots.

2. This function supports Asynchronous operation. You can continuously remove and

connect multiple Flash drive types without pushing any buttons.

NOTE:
a) This function may change the data and format on the Flash drive.
b) To protect the source drive’s data, the system does not check the capacity of the

source drive.

c) If the red LED illuminates indicating an error, you can use the up and down arrows

for error information.

5. Information

5.1 USB Info

Show the Flash drive’s basic information, such as drive type, content size, and

total capacity.