beautypg.com

StarTech.com S352BMU3N Manual User Manual

Page 53

background image

Instruction Manual

49

4. To reboot the enclosure click the Reboot button.

You will receive a message alerting you that all open connections will be reset, click the

OK button if you would like to continue.
5. The enclosure will reboot.
Note: It may take several seconds for the system to fully reboot. If you have changed

the IP address of the enclosure or if the enclosure is set to automatically obtain an

IP, you may have to update the address bar to regain access to the enclosure’s web

configurations.

Shutdown your NAS Enclosure remotely

using the Web Interface

1. Access Configuration Page. (See: Access configuration page)