StarTech.com SAT3540U3ER - Manual (Page 6)

Instruction Manual
3
Installation
Hardware Installation
1. Attach the included Hard Drive Handles to each of the hard
drives with the supplied screws and screw driver.
2. Press the front door in to release the latch and open the door. The door is also
removable for easier access.
3. Inside will be a metal drive cage in front of the drive bays. Along the top of the drive
cage are two small tabs. Press them down to release the cage and remove it.
*installation photos for reference only
WARNING! Hard drives and storage enclosures require careful handling, especially
when being transported. If you are not careful with your hard disk, lost data may
result. Always handle your hard drive and storage device with caution. Be sure that
you are properly grounded by wearing an anti-static strap when handling computer
components or discharge yourself of any static electricity build-up by touching a large
grounded metal surface (such as the computer case) for several seconds.