Cabletron Systems FOT-F3 - Manual (Page 14)

Page 2 - 1
REQUIREMENTS/SPECS.
CHAPTER 2
INSTALLATION REQUIREMENTS/
SPECIFICATIONS
Before you attempt to install Cabletron Systems’ FOT-F3
Fiber Optic Transceiver, review the network design
guidelines outlined in this chapter. In addition, you should
review the operating specifications and environmental
requirements which are also listed.
All conditions, guidelines, specifications, and requirements
included in this chapter must be met to ensure satisfactory
performance of the FOT-F3. Failure to follow these
guidelines may result in unsatisfactory network
performance.
2.1 NETWORK DESIGN GUIDELINES
The following design guidelines must be met when
connecting devices using the FOT-F3 Fiber Optic
Transceiver.