beautypg.com

StarTech.com SV565DUTPU User Manual

Page 12

background image

Instruction Manual

9

NOTE: The hotkey command will be automatically time-out if
• There is no activity detected by the keyboard within 3 seconds after the leading

code input (when Mask Hotkey OFF) or within 6 seconds after [BTN] (2sec.) (when

Mask Hotkey ON).

• Press the button Esc once to escape from the hotkey mode.
• Press the Push-Button once to escape from the hotkey mode and switch to either

the Local or Remote mode.

Before inserting the hotkey commands, it’s required to launch the leading code (refer

to the diagram above) according to different situations, and succeed by one or two

more keystrokes as the following charts show.
NOTE: Hotkeys should be entered using the top row numbers and the left Ctrl, Alt,

Shift keys only