StarTech.com SV431DDVDUA - Manual (Page 7)

Instruction Manual
3
OPTIONAL: Connect any other USB peripherals you wish to share between the
connected computers/devices to the extra USB Hub ports on the Console side.
5. Connect the external power adapter from a wall outlet to the power connector on
the rear panel of the KVM switch. The Power LED should light up solid and/or the
LED for the selected PC port.
6. Power up the first computer/device and wait for it to fully boot and test keyboard/
mouse functionality.
7. Once operation has been successfully confirmed, switch to the next port and power
up that computer/device and confirm.
Driver Installation
No driver installation is required for the KVM switch, as the keyboard and mouse uses
native USB keyboard/mouse drivers that are already installed on all operating systems
that fully support USB.