StarTech.com CAB1631HDU - Manual (Page 15)

Instruction Manual
12
Press right and release
Press right and release
Press right and release
Press right and release
Press right and release
Press right and release
Press right and release
Press right and release
Press right and release
right < > right < > right < >
left < > left < > left < >
< >
right right
left left
Change Configuration while Running
A device (a computer or a KVM switch) at any ‘PC x’ port can be changed at any time
after initial power-up. If you change any one of the PC 1 to PC 8 ports connection
from a computer to a Slave or vice versa, or replace the devices of a port, the OSD
will update this change the next time it is activated.
NOTE: Any new device must be turned off before it is connected to the Master.