StarTech.com CAB1631HDU - Manual (Page 10)

Instruction Manual
7
Manual Scan
Scan through power-on computers one by one by keyboard control. Scan Type
(:More\Scan Type) determines if scanned computers must also be eye mark
selected. Press the up arrow < > key to select the previous computer and the
down arrow < > key to select the next computer. Press any other key to abort
Manual Scan mode.
Audio Stick
An optional multimedia module can be linked to the back of each KVM Module for
selecting microphone and stereo speaker signals. There are two options for Audio
Stick: On and Off. When set to On, audio selection follows computer selection. When
set to Off, audio selection stops following computer selection. It is useful if you want
to listen to a particular computer’s audio signal while operating other computers.
The non-volatile memory stores the Audio Stick setting.
Scan Type
Ready PC + N : In Scan mode, scan through power-on and eye mark selected
computers. Ready PC: In Scan mode, scan through power-on computers.
N
only: In Scan mode, scans through any selected computer regardless of
computer power status with an eye mark.
The non-volatile memory stores the Scan Type setting.
Scan Rate
Sets the duration of a computer displayed in Auto Scan mode. The options are 3
seconds, 8 seconds, 15 seconds and 30 seconds. The non-volatile memory stores the
Scan Rate setting.
Keyboard Speed
The Console offers keyboard typematic settings that override similar settings in the
BIOS and in Windows. Available speed options are Low, Middle, Fast and Faster as
10, 15, 20 and 30 characters/sec respectively. The non-volatile memory stores the
Keyboard Speed setting.
Hotkey Menu
When you hit the left key twice within two seconds, the Hotkey Menu
appears displaying a list of hot-key commands if the option is On. The Hotkey Menu
can be turned Off if you prefer not to see it when the left key is hit twice.
The non-volatile memory stores the Hotkey Menu setting.
N