StarTech.com CAB1631HDU - Manual (Page 13)

Instruction Manual
10
Left + left + <6> +
Selects a computer connected to port C of a Slave connected to port 6 of the Master.
Auto Scan, automatically scans power-on computers one by one at a fixed interval:
Left + left +
When Auto Scan detects any keyboard or mouse activity, it suspends the scanning
till activity stops; it then resumes with the next computer in sequence. The length of
the Auto Scan interval (Scan Rate) is adjustable, see below. To abort the Auto Scan
mode, press the left key twice.
NOTE: Scan Type determines whether an eye-marked computer is to be displayed
during Auto Scan.
Manual Scan enables you to manually switch back and forth between power-on computers.
Left + left +
Press < > or < > to select the previous or the next computer in sequence. Press
any other key to abort the Manual Scan.
NOTE: Scan Type determines whether an eye-marked computer is to be displayed
during Auto Scan.
To adjust Scan Rate which sets the duration before switching to the next computer in
Auto Scan:
Left + left +
The Rack Console sends one to four beeps indicating scan interval of 3, 8, 15 and 30
seconds respectively.
To adjust keyboard Typematic Rate (characters/sec), this setting over-rides that of
BIOS and any operating system:
Left + left +
The Rack Console will generate 1 to 4 beeps corresponding to 10, 15, 20 and 30
characters/sec respectively.
Change Leading Hotkey
The default leading hotkey sequence involves pressing the left twice in
succession (e.g. left , left ). This can be changed to the right
key instead, to avoid accidental activation due to using the left key for
functions such as Copy/Paste.