Source Audio Soundblox 2 Dimension Reverb - Manual (Page 13)

Controls: Knobs | 13
• DEPTH (red LED): The second control related to the LFO. The
DEPTH control adjusts the total amount of modulation applied
to the reverb. As the depth is turned up, there is a sense that the
wet signal is running through a chorus effect. With more depth,
pitch shifts on individual echoes may be heard and things get
rather unnatural (but what’s wrong with that?).
Factory Defaults: given the number of different functions available on
the OPTION KNOB, it can be useful to “zero” all of the controls to a
default value. We pre-loaded the Dimension Reverb with unique default
settings for each reverb type which are a good starting point for each
reverb sound. You can recall these values at any time by pressing and
holding the OPTION SELECT button until the six red and green LEDs
begin to blink.
MIX
Adjusts the balance of the wet reverb sound and the clean input signal.
Full counter-clockwise is a completely dry tone and full clockwise is the
effected tone with no dry signal added.
DRY WET
MIX
- Continued