Source Audio Soundblox 2 OFD Bass microModeler User Manual
Page 19
External Control | 19
MIDI CONTROL
The Soundblox 2 OFD can be controlled via General MIDI messages. In
order to use the MIDI functionality of the unit, it requires a Source Audio
Soundblox 2 MIDI Adapter. Please check www.sourceaudio.net for avail-
ability. The adapter connects to the Multi-Function input and provides
standard MIDI IN and OUT 5-pin DIN connectors.
Using Soundblox 2 pedals with MIDI greatly extends the functionality of
the units. Having MIDI I/O allows for remote automation, external control-
lers, firmware updates and more. If you have more than one Soundblox 2
pedal, only one MIDI Adapter is necessary. The Multi-Function output will
act as a MIDI thru to pass the MIDI messages on the other pedals via a
Source Audio SA160 Daisy Chain cable.
For information on using your Soundblox 2 with MIDI and for MIDI
mappings, please visit our website at www.sourceaudio.net