Sonics VCX134AT - Manual (Page 11)

11
REVIEW: The REVIEW function provides a “window” on the process by displaying
various operating parameters without process interruption. Pressing the
ENTER/REVIEW key repeatedly during processing will consecutively display the
following information.
a) Selected amplitude:
e.g. Amplitude 40%
b) Amount of power in watts, and accumulated amount of energy in JOULES
delivered to the probe:
OVERLOAD CONDITION
If the Ultrasonic Processor stops working, and an OVERLOAD indication is displayed on
the screen, check for possible causes as outlined in the above paragraph, then press the
key to switch the unit off, and the key to switch the unit back on.
1. Press the key. The screen will display the power rating of the Ultrasonic
Processor, and AMPL.
2. Turn the liquid delivery system on.
AMPL __ __%
NOTE
For the majority of atomizing applications, low amplitude will atomize the
sample better than high amplitude.
|
NOTE
The amount of energy displayed will be only for one cycle. Initiating a new cycle
will reset the display to zero.
O
|