Admin commands 41, System commands 41 – Solvline PB30xx+ User Manual
Page 41
Portbase User Guide
41
5. Admin commands
Configure general information of Portbase.
z set admin [ name / website / contact ]
-
set admin name < device name > (Default: Portbase-2)
Change the device name of Portbase. When connecting to Web or Telnet, the name will be
displayed.
-
set admin website
Change the web site for support information that is displayed in Web manager.
-
set admin contact
Change the contact for support information that is displayed in Web manager.
6. System commands
z set passwd
Set username and password for Web and Telnet connection.
z set factory
Restore all settings to factory default. Requires reboot for changes to take effect.
z set save
Save current configuration settings. Requires reboot for changes to take effect.
z set reboot
Reboot Portbase.
z set update < firmware name >
Update the firmware of Portbase.
(In order to update firmware via Telnet, the firmware file needs to uploaded by FTP into the
temporary memory of Portbase before running this command.)