View commands 36, Network commands 36 – Solvline PB30xx+ User Manual
Page 36
Portbase User Guide
36
2. View commands
z set view [ all / nw / serial / admin ]
-
set view all : View all current settings.
-
set view nw : View current network settings.
-
set view serial : View current serial port settings.
-
set view admin : View current admin settings.
3. Network commands
Configure general network environment and network management.
z set nw [ mode / ip / subnet / gateway / dns / nms ]
[ Network Configuration ]
-
set nw mode [ static / dhcp ] (Default: static )
IP obtaining method for Portbase’s network connection
-
set nw ip
192.168.1.71)
Set the current IP address Portbase is assigned to.
When line type is Static IP, manually enter an appropriate IP address.
When line type is DHCP, it is not editable.
-
set nw subnet
(Default: 255.255.255.0)
Set the subnet mask Portbase is assigned to.
When line type is Static IP, manually enter an appropriate subnet mask.
When line type is DHCP, it is not editable.
-
set nw gateway
192.168.1.1)
Set the default gateway Portbase is assigned to.
When line type is Static IP, manually enter an appropriate gateway.
When line type is DHCP, it is not editable.
-
set nw dns
Set the DNS address of Portbase.