Solberg SRS Series - Manual (Page 10)

Solberg Manufacturing, Inc., 1151 Ardmore Itasca, IL 60143 USA
Ph: 630.773.1363 Fax: 630.773.0727 Email: [email protected] Web: www.solbergmfg.com
Page 10
3. Removing Element for Service/Maintenance.
A. Remove retaining hex head/wing-nut and washer carefully, and then
remove element.
B. Clean sealing surfaces of housing and element endcaps so that they are
free of dirt or any other particulate.
Figure C.3.1: Retaining washer and wing-nut.
Figure C.3.2: Element removal. Figure C.3.3: Element free from housing.