Snazzy FX DREAMBOAT User Manual
Page 8
between the pulses, try lowering the PITCH of the Bottom
Chaotic Oscillator.
USE THE BOTTOM-MOST LED FOR INDICATION OF GATE SPEED
SIGNAL JACKS
(X and Y outputs are not TRUE COPIES..they sound and act differently than
each other!)
7. X output (top oscillator)
8. Y output (top oscillator)
9. CV INPUT (top oscillator)
10. X output (bottom oscillator)
11. Y output (bottom oscillator)
12. CV INPUT (bottom oscillator)
QUICK START:
Hey, I’m confused….what do all these knobs and jacks do?
TIP- there really isn’t too much to it. It’s a simple module.
the top section (CO1) puts out Chaos that you can HEAR
the bottom section (CO2) puts out Chaos that is for modulation
(LFO rates)
Start by turning knobs until all three LEDS are firing. Plug the
outputs into some other modules and start making sound!
Use the Gate to fire VCA’s or ADSR’s/AR’s