Snazzy FX DREAMBOAT - Manual (Page 13)

An instability source for otherwise traditional patches
A drama machine
try feeding the gate into the RESET Input of a sequencer
try feeding the CO1’s output into the SYNC in of a VCO
plug the audio from the Dreamboat into a pulse divider
into an octave shifter
with a sequencer…set CO1 right below chaos. Plug a melodic
sequence into the CV input. Use the gate out from the Dreamboat
to chop up the audio going into your VCA.
Feed the audio out into reverb!
Mix its audio input with a sine wave for a good drum tone
Feed its audio into the FM in of a VCO for interesting modulation
like nothing else
PLUG WHITE NOISE Into the CV INS
Feed a drum loop into CO1’s CV Input.
For some great loops, plug a gate sequence or a rhythmic pulse
into the CV Input of a CO. Adjust the CV and Pitch until it is
gating the signal.
The CV inputs can be used to change the pitch or they can act
like a reset. Try using a square wave to “SYNC” the Dreamboat
***feedback filter patch***
plug the Co1 X output into a mixer