Slant/Fin CHS-399 - Manual (Page 23)

CHS Series Controller and Display
│
Slant Fin Corp.
21
Table 2-13 System Identification & Access Parameters
Parameter Description Factory Settings
Boiler name * Name describing the specific boiler. Limited to 20 characters. e.g.: 110MBH
OEM ID Name identifying factory configuration settings; field is read only. N/A
MB1 Modbus
address * Modbus communication address used by the display to identify the attached
controller. No need to change this setting. Range: 1 – 8.
1
MB2 Modbus
address *
Unique controller I.D. needed when multiple boilers are connected together in a
Lead Lag cascade configuration. Each boiler in a Lead Lag cascade
configuration must have a unique setting. Range: 1 – 8.
1
Modbus address Displays the “MB1 Modbus address” setting – do not adjust this setting. 1
Modbus port used Identifies the Modbus port used by the display to controller; field is read only. MB1
Product ID
Controller type identification; field is read only.
Residential
Product family Hydronic boiler
OS number
Controller model identification; field is read only. R7910B1015
Model name
Software version Controller software version identification; field is read only. N/A
Date code Controller date code; field is read only. N/A
Application
revision
Controller application revision; field is read only. N/A
Safety
revision
Controller safety revision; field is read only. N/A
* = Password protected