Slant/Fin CHS-399 - Manual (Page 3)

CHS Series CHS 300-399 Common Venting
│ Slant Fin Corp.
3
2.0 SPECIFICATIONS
Common Vent Manifold Configurations
The CHS 300-399 Common Venting is available in 2 configurations; each configuration is applicable to a certain
boiler combination. The manifolds can be assembled to direct Exhaust Gas and Combustion Air-Inlet piping to
the left or right.
Table 2-1 CHS 300-399 Common Venting
PART NO. DESCRIPTION COMMON VENTING IMAGE
818 192
Common Venting for the Exhaust Vent Outlet
and Combustion Air-Inlet of two (2) Slant/Fin
CHS 300-399 boilers.
(Models CHS 300-399 Common Venting Shown Exhaust Gas and
Combustion Air-Inlet piping being directed to the LEFT)
818 193
Common Venting for the Exhaust Vent Outlet
and Combustion Air-Inlet of three (3) Slant/Fin
CHS 300-399 boilers.
(Models CHS 300-399 Common Venting Shown Exhaust Gas and
Combustion Air-Inlet piping being directed to the RIGHT)
Failure to match the appropriate CHS 300-399 Common Venting with the appropriate
boilers, as indicated in Table 2-1, may result in boiler or vent system malfunctions
leading to property damage, serious injury, or death.
Inspection
Prior to the installation of the CHS 300-399 Common Venting, conduct a visual inspection of each vent
component to ensure the parts were not damaged during shipping and were shipped complete.
Do not install broken or damaged venting components; doing so may result in property
damage, serious injury, or death.