SilentKnight SK-Pull-SA Addressable Single Action Pull Station - Manual (Page 2)

Setting the SK-Pull-SA Address
The SK-Pull-SA Addressable pull station is factory preset with address ‘00.’ Set the address
for the pull station by turning the rotary address switches on the addressable module mounted
inside the pull station. Only one device per address is allowed. Multiple modules may not
be set to the same address on the Signaling Line Circuit. Once the address is set, record it
in the space provided on the product ID label located inside the pull station.
Note – Opening the pull
station door will not activate
or deactivate the alarm switch.
NORMAL
ACTIV
ATED
4 3 2 1
0 0
10
11
12
13
14 15 1 1
2 2
3 3
4 4
TENS ONES
6 6
7 7 8 8 9 9 5 5
UL Approved Label Here
LOOP
NOTIFIER
NBG - 12 Series
NON-CODED
FIRE ALARM BOX
LISTED
23424
REFER TO DOCUMENT
P/N 50997 REV-A
AHDHDH
M
ADDRESS
L U
PRODUCT IDENTIFICATION LABEL
0
1
2
3
4
5
6
7 8
9
10
11
12
13
15 14
ADDRESS
LOOP
0 0
10
11
12
13
14 15 1 1
2 2
3 3
4 4
6 6
7 7 8 8 9 9 5 5
LED
ROTARY ADDRESS SWITCHES
LED OPERATION
Alarm:
Steady RED
Normal:
Flash GREEN
Note: LED is
visible through
translucent handle.
P0130-00