SilentKnight EVS-VCM - Manual (Page 2)

EVS-VCM Voice Control Module Installation Instructions
2 Document LS10067-001SK-E Rev A
Installing the Microphone
To install the microphone:
1. Clip the microphone into the microphone
clip. See Figure 3.
Figure 3: Sliding Microphone into Microphone
Clip
2. Insert microphone cord through hole at
the bottom of the dead front panel. See
Figure 4.
Figure 4: Microphone Cord Inserted Through
Dead Front Panel Hole
3. Attach strain relief clip to microphone
cord. The strain relief clip should have
about 2¾” of microphone cord through it.
See Figure 5.
Figure 5: Installing Strain Relief Clip
4. Push the strain into the hole in the dead
front panel.
5. Restore AC power and reconnect the
backup batteries.
2-3/4”