SIG SAUER MOSQUITO - Manual (Page 19)

Maintenance
18 US 06.01
8. Remove slide assembly (slide, recoil spring
guide and recoil spring) from the barrel
muzzle.
This level of stripping is sufficient for a thorough
cleaning after firing.
9.2 Cleaning the pistol
Procedure:
1. Moisten cleaning brushes with gun oil and
insert into the barrel through the chamber.
Carefully remove all powder residue and dirt in
the barrel and chamber with the cleaning
brush.
2. Remove powder residue and oil using from the
chamber and barrel using a cleaning patch.
3. Clean external surfaces of the barrel with a
brush that has been moistened with gun oil.
4. Wipe off frame, slide, recoil spring guide and
recoil spring with a cloth lightly coated with gun
oil or grease.
5. Lightly oil barrel bore and chamber. Be sure to
remove excess lubricant.
CAUTION!
Possibly damage to the pistol
• Further dismantling of the pistol may only be
carried out by qualified armorers and
gunsmiths.
CAUTION!
Possibly damage to the pistol
• Never clean the barrel from the front (muzzle
end) and never use steel brushes, as these
can damage the smooth surface of the barrel.
Use a suitable cleaning rod and brush
designed for .22 caliber.
• Solvents can damage the surface of the
pistol. Before using a cleaning or solvent
agent, take note of the instructions and
warnings provided by the manufacturer.
Fig. 17, Cleaning Standard version
4 3a/b 2
15
51
1a