SIG SAUER MOSQUITO - Manual (Page 15)

Conversion
14 US 06.01
7 Conversion
7.1 Conversion to Standard version
Procedure:
1. Remove the front sight 5 and insert the cap 78
into the notch of the slide.
2. Disassemble the pistol (see chapter 9.1).
3. Exchange the barrel of the Standard version
1a with the barrel of the Sport version 1b
(see chapter 7.3).
4. Reassemble the pistol
(see chapter 9.3).
5. Install the counterweight 77
(see chapter 7.1.2).
6. Insert the front sight 5 into the notch of the
counterweight.
7. Sight correction (see chapter 8).
7.1.1 Removing the counterweight
Procedure:
1. Release the threaded pin 79 using the allen
wrench 80 and remove it (see Fig. 8).
2. Remove the counterweight 77.
7.1.2 Installing the counterweight
Procedure:
1. Attach the counterweight 77.
2. Fix the counterweight with the threaded pin 79.
For this use the allen wrench 80 provided.
abziehen.
Fig. 7, Sport version
5 78
77
CAUTION!
Possible damage to the pistol
• Do not tighten the threaded pin too tight.
Fig. 8
77
79
80