Seville Classics UHD20242 - Manual (Page 11)

Step 13.
Step 14.
[Use (#15) Screw B for this step].
From above, slide Left and Right Drawer Panel into
into (#12-1) Medium-size Drawer Front as detail
picture shown, use 7pcs (#15) Screw B to tighten.
Note: The drawer panel should be inserted behind
the folded drawer front edge. The drawer face will
overlap the drawer panel tabs.
Once all the drawer panels are aligned, tighten all
the drawer screws.
Note: Do not tighten the screws all the way, until
step 14 is completed.
Assemble Large Drawer in the same way.
Repeat Step 13 and Step 14, but using (#13-1) Large
Drawer Front Panel, (#13-2) Large Drawer Bottom
Panel.
UItraHD Rolling Workbench Cabinet (Model No. 20242)
(pg 10 of 14)
lnstall (#12-2) Medium-size Drawer Bottom and
(#12-5) Medium-size Drawer Back Panel.
[Use (#15) Screw B for this step].
1. Fold the Left and Right panel up.
2. Attach the back panel to the folded drawer
panel, use 7pcs (#15) Screw B to tighten.
lnstall (#12-1) Medium-size Drawer Front.
#12-2
#12-5
#15
#12-1
#15
#13-1
#13-2
#13-4