Sceptre X20WG-NAGA2 - Manual (Page 32)

Page32 SCEPTRE X20
* % ( ) 4 * % ( ) 4 * % ( ) 4 * % ( ) 4
IMPORTANT
1. The power cable has to be removed from the socket before
cleaning the LCD.
2. Do not use volatile solvent (alcohol, rosin, and toluene) to clean
the LCD. These types of chemicals might damage the housing
and the LCD glass.
Cleaning the bezel
1. Use a 100% cotton cloth or micro-fiber cloth for cleaning.
2. If the bezel is dirty to the point where you cannot simply dry wipe it,
please lightly dampen the wiping material with clean water and
wipe again. Wipe the display with a dry micro-fiber cloth or 100%
cotton cloth afterwards.
Please Note :
Make sure you wring the water out of the cloth before
cleaning the bezel in order to prevent water from
penetrating into the electronics.
Cleaning the Screen
1. Use a 100% cotton cloth or micro-fiber cloth for cleaning.
2. The LCD screen glass is extremely fragile. Do not scrape it with
any material. Do not press or tap the screen to avoid cracking.
When the screen is dirty to the point where you cannot simply dry
wipe it, please lightly dampen the wiping material with clean water
and wipe again. Wipe the display with a dry micro-fiber cloth or
100% cotton cloth afterwards.