Sceptre X20WG-NAGA2 - Manual (Page 19)

SCEPTRE X20 Page19
( ) & ( ) & ( ) & ( ) &
& * + ) $ & $ , & * + ) $ & $ , & * + ) $ & $ , & * + ) $ & $ ,
1. Make sure the power of X20 LCD MONITOR is turned off.
2. Obtain a DVI cable and connect to the DVI connection on your PC.
Connect the other end of the cable to your X20 LCD MONITOR.
3. Turn on the power of both the X20 LCD MONITOR and the PC.
Please Note :
Some video cards may have their DVI connection turned off by default.
If you do not get video, please consult your video card’s technical
support.
The PC’s clearest picture is produced under 1680x1050 at 60Hz.