Sandia Aerospace SAC 7-35 User Manual
Page 27
4.3
Status Line Descriptions
There are three status lines that indicate the various parameter settings. The first line contains informa-
tion about the RS232 port communication settings.:
305586-00
26
Figure 4-2
RS-232 Status Lines Setting
Serial > G : 9600 K : 1200 S : 9600 E : 1200
Mode > > AS_Cutoff = 40 ARINC=A DASH -00
Unit Dash Number (factory setting only)
ARINC Output Seledtion (Selectable in -01 version only1 version only A for Airdata B for ADS-B)
Indicated Airspeed low end cutoff
Port4 Baud Rate
Port4 Format (S=Standard,E=Extended)
Port3 Baud Rate
Port3 Format (S=Standard,E=Extended)
Port2 Baud Rate
Port2 Format
(G=Garmin,K=King,-=None)
Port1 Baud Rate
Port1 Format
(G=Garmin, K=King, -=None)
Trim >> Alt: -1270:1270 IAS: 0 :10 Baro : -1.27 : 1.27 OAT: . 0 : .0 Hdg: 000:0
Heading Syncro Offset/RotDirection
OAT Probe Trim hi lo (C)
Baro Setting Trim hi lo(in/hg)
Airspeed trim hi lo (kts)
Altitude trim hi lo (ft)
Figure 4-3
SAC 7-35 Configuration Mode - Unit Trim Status
Fuel >> K= 130000 : 500 0s delay 6.02lb/g
Fuel Density/Type Setting
Fuel Startup Delay/Ignore Time (sec)
Fuel K-Factor Left Right
Figure 4-4
SAC 7-35 Configuration Mode - Unit Fuel Status