Ryvyr V-PURUS-30DW - Manual (Page 2)

10.2014
For customer support please visit www.ryvyr.com or call 866.395.8112 weekdays 8:00 to 5:00 EST or fax 866.395.8113 any time
PLEASE NOTE: For SVT240xx Stone Integral Top installation, additional cutouts on the top of the vanity may be required to accommodate
the plumbing connections for the drain and faucet. The pre-drilled drain hole cutout in the vanity’s wood top may be enlarged to 4” x 4”
to align with the drain hole in the vanity top. To accommodate the faucet, a 3” x 10” cutout can be made to allow the faucet body and
supply lines to recess into the vanity as needed.
INSTALLATION INSTRUCTIONS
• To maintain the beauty of the finish, avoid placing the furniture in direct sunlight, as sunlight causes fading. Also avoid extreme
changes in temperature by arranging furniture away from radiators, heat and air vents, and air conditioning units. Avoid placing
furniture directly under windows. Damage caused by any of the afore mentioned will void the warranty.
• Clean the furniture frequently with a clean, soft, dry, lint-free cloth. Clean the surface by gently rubbing in the direction of the grain.
Avoid using silicone cleaners and waxes.
• Clean up excess water and spills immediately. Use blotting rather than a wiping action. Water left over a long period of time will
cause white spots in the finish and the furniture to possibly warp. Please note that some chemicals may damage the finish.
Standing water and the use of strong chemicals will void the warranty.
CARE AND CLEANING
ROUGH-IN DIMENSIONS FOR CUT OUT
10" [254mm]
9" [223mm]
13" [331mm] 13" [331mm]
10" [254mm] 10" [254mm]
4" [101mm]
4”
4”
3/4”
3/4” [19mm]