Ryvyr BR-KARA-24DE User Manual

Indus

CARE AND CLEANING

•

Dust the furniture frequently with a clean, soft, dry, lint-free cloth, as well as polish it on a regular basis. Clean the surface by rubbing

in the direction of the grain. Avoid using silicone cleaners and waxes.

•

Clean up excess water and spills immediately. Use blotting rather than a wiping action. Water left over a long period of time will

cause white spots in the finish. Please note that some chemicals may damage the finish

INSTALLATION INSTRUCTIONS

INDUS

BRIDGE

BR-INDUS-DR12DW

09.2014

For customer support please visit www.ryvyr.com or call 866.395.8112 weekdays 8:00 to 5:00 EST or fax 866.395.8113 any time

THANK YOU FOR CHOOSING RYVYR

Please take a few minutes to review this manual before you start installation. If you encounter

any installation problems, please don’t hesitate to contact us. Before you begin, please

observe all local building codes. Unpack the new product and inspect for damage. The

appearance of your vanity may differ from the illustrations in this guide. These instructions

still apply. Please ensure the finished wall is straight and plumb and the floor is flat and

perpendicular to the finished wall.

SUGGESTED TOOLS AND MATERIALS

Phillips Screwdriver

Level

Drill

Tape Measure

Safety Glasses

10'

NOTE: Where possible, try to affix a stud or provide adequate wall support for the size and weight of the bridge. Bridge comes with

pre-attached brackets on the frame and two wall mount rails. Affix the rails to the wall in the desired location by pre-drilling the rails and

then affixing the rails using the proper fastening, based upon wall material.

BRIDGE INSTALLATION

Finished Wall

PARTS / HARDWARE INCLUDED

115010

200001

This manual is related to the following products: