Ryvyr V-COLORADO-DR30MP - Manual

08.2014
For customer support please visit www.ryvyr.com or call 866.395.8112 weekdays 8:00 to 5:00 EST or fax 866.395.8113 any time
INSTALLATION INSTRUCTIONS
COLORADO
VANITY
V-COLORADO-DRXXXX
TM
SUGGESTED TOOLS AND MATERIALS
Phillips Screwdriver Level Drill Tape Measure Safety Glasses
10'
THANK YOU FOR CHOOSING RYVYR
Please take a few minutes to review this manual before you start installation. If you encounter
any installation problems, please don’t hesitate to contact us. Before you begin, please
observe all local building codes. Unpack the new product and inspect for damage. The
appearance of your vanity may differ from the illustrations in this guide. These instructions
still apply. Please ensure the finished wall is straight and plumb and the floor is flat and
perpendicular to the finished wall.
ROUGH-IN DIMENSIONS
X" [Ymm]
Model # Width
V-COLORADO-DR24BK x = 24" [610mm]
V-COLORADO-DR24MP x = 24" [610mm]
V-COLORADO-DR30BK x = 30" [762mm]
V-COLORADO-DR30MP x = 30" [762mm]
FLOOR
FINISHED
WALL
21” [533mm]
32” [812mm] 32” [812mm]