Ryvyr V-SELLA-80MWT - Manual

INSTALLATION INSTRUCTIONS
VANITY
V-SELLA-60MXX| V-SELLA-80MXX
SUGGESTED TOOLS AND MATERIALS
Phillips Screwdriver Level Drill Tape Measure Safety Glasses
10'
THANK YOU FOR CHOOSING RYVYR
Please take a few minutes to review this manual before you start installation. If you
encounter any installation problems, please don’t hesitate to contact us. Before you
begin, please observe all local building codes. Unpack the new product and inspect
for damage. Please ensure the finished wall is straight and plumb and the floor is flat
and perpendicular to the finished wall.
ROUGH-IN DIMENSIONS
10.2014
For customer support please visit www.ryvyr.com or call 866.395.8112 weekdays 8:00 to 5:00 EST or fax 866.395.8113 any time
FLOOR
FINISHED
WALL
SELLA
TM
SUGGESTED HEIGHT:
Undermount Application:
13.25” (336.6mm)
Vessel Application:
7.25” (184mm)
Model # Width
V-SELLA-M60XX x = 23.6" y= [600mm]
V-SELLA-M80XX x = 31.5" y= [800mm]
x [y]
20.67" [525mm]
17.7" [450mm]
WALL-MOUNTED
BRACKET
(CONTRACTOR INSTALLED)
WALL-HANGING
BRACKET SYSTEM
6.8" [173mm]
13.7" [348mm]
PRE-MOUNTED
TO VANITY