Ryvyr M-BAMBU-26DB User Manual

Bambu

10.2014

For customer support please visit www.ryvyr.com or call 866.395.8112 weekdays 8:00 to 5:00 EST or fax 866.395.8113 any time

INSTALLATION INSTRUCTIONS

BAMBU

MIRROR

M-BAMBU-XXXX

THANK YOU FOR CHOOSING RYVYR

Please take a few minutes to review this manual before you start installation. If you encounter

any installation problems, please don’t hesitate to contact us. Before you begin, please

observe all local building codes. Unpack the new product and inspect for damage. The

appearance of your mirror may differ from the illustrations in this guide. These instructions

still apply. Please ensure the finished wall is straight and plumb and the floor is flat and

perpendicular to the finished wall.

CARE AND CLEANING

• To maintain the beauty of the finish, avoid placing the furniture in direct sunlight, as sunlight causes fading. Also avoid changes

in temperature by arranging furniture away from radiators, heat and air vents, and air conditioning units. Avoid placing directly

under windows.

• Clean the mirror using a soft, slightly damp cloth. When cleaning the mirror, spray the mirror with a glass cleaner and wipe clean.

Avoid using silicone cleaners and waxes.

SUGGESTED TOOLS AND MATERIALS

Phillips Screwdriver

Level

Drill

Tape Measure

Safety Glasses

10'

NOTE: Where possible, try to affix a stud or provide adequate wall support for the size and weight of the mirror. Mirror comes with

pre-attached brackets on the frame and a wall mount cleat. Affix the cleat to the wall in the desired location by pre-drilling the cleat and

then affixing the cleat using the proper fastening, based upon wall material.

MIRROR INSTALLATION

Finished Wall

PARTS / HARDWARE INCLUDED

115010

200001