beautypg.com

Ryvyr V-KENT-30WW User Manual

Page 2

background image

08.2014

For customer support please visit www.ryvyr.com or call 866.395.8112 weekdays 8:00 to 5:00 EST or fax 866.395.8113 any time

• Position the vanity against the finished wall. If necessary, turn the leg levelers to achieve level.

• Mark the supply and drain locations on the inside of the vanity back wall.

• Move the vanity away from the wall and cut the marked supply and drain locations from inside.

• Position the vanity against the wall, aligning the supply and drain locations with the cut holes.

• Install the countertop, sink, drain and faucet according to the manufacturer’s instructions.

INSTALLATION INSTRUCTIONS

• To maintain the beauty of the finish, avoid placing the furniture in direct sunlight, as sunlight causes fading. Also avoid extreme

changes in temperature by arranging furniture away from radiators, heat and air vents, and air conditioning units. Avoid placing

furniture directly under windows.

• Dust the vanity frequently with a clean, soft, dry, lint-free cloth, as well as polish it on a regular basis. Clean the surface by rubbing

in the direction of the grain. Avoid using silicone cleaners and waxes.

• Clean up excess water and spills immediately. Use blotting rather than a wiping action. Water left over a long period of time will

cause white spots in the finish. Please note that some chemicals may damage the finish.

CARE AND CLEANING

Mark & cut supply hole

locations on wall

Position vanity

against wall

Install sink, faucet,

& countertop

according to

manufacturer’s

instructions

**NOTE: items shown

are Ryvyr recommened

components and are not

included.

This manual is related to the following products: