Ryvyr V-INDUS-48DW User Manual
Page 2
CARE AND CLEANING OF VANITY
Dust the vanity frequently with a clean, soft, dry, lint-free cloth, as well as polish it on a regular basis. Clean the surface by
rubbing in the direction of the grain. Avoid using silicone cleaners and waxes.
Clean up excess water and spills immediately. Use blotting rather than a wiping action. Water left over a long period of
time will cause white spots in the finish. Please note that some chemicals may damage the finish.
• Position the vanity against the finished wall. If necessary, turn the leg levelers to achieve level.
• The vanity legs are removable per your installation needs.
• Mark the supply and drain locations on the inside of the vanity back wall.
• Move the vanity away from the wall and cut the marked supply and drain locations from inside.
• Position the vanity against the wall, aligning the supply and drain locations with the cut holes.
• Install the countertop, sink, drain and faucet according to the manufacturer’s instructions.
INSTALLATION INSTRUCTIONS
VANITY TOP / UNDERMOUNT
SINK APPLICATION
* Shown with Extension Legs Installed
VESSEL SINK APPLICATION
* Shown with Extension Legs Removed
4” Extension Legs
09.2014
For customer support please visit www.ryvyr.com or call 866.395.8112 weekdays 8:00 to 5:00 EST or fax 866.395.8113 any time
09.2014
For customer support please visit www.ryvyr.com or call 866.395.8112 weekdays 8:00 to 5:00 EST or fax 866.395.8113 any time
09.2014
For customer support please visit www.ryvyr.com or call 866.395.8112 weekdays 8:00 to 5:00 EST or fax 866.395.8113 any time