Concord Camera 4060 AF - Manual (Page 10)

8
GETTING STARTED
Setting the Time
The time is displayed in hour, minute format.
1. Press the joystick to change the selection in the blinking position until you reach the desired setting.
2. Press the joystick to highlight the hour (HH), minutes (MM) or AM/PM.
• The selection will blink when it is highlighted.
3. Repeat steps 1 and 2 until the time is set.
4. Press the OK button to set the time by pressing the joystick in.
Note:
The time can be displayed in a 12-hour or 24-hour format. Please go to page.31 to change this setting.
If the battery is removed or dead for more than 4 minutes, the time will return to its default setting.
TURNING THE LCD/ICONS ON AND OFF
The camera has a 1.5” LCD which can frame subjects for image and video clip capture, review stored images
and video clips and to display the current camera settings.
1. Use the ( ) button to toggle the LCD mode. The LCD mode changes each time the button is pressed as
follows:
Icons off
LCD off
LCD on with icons
Note: In order to save battery power, you may turn off the LCD display in ( ) Review Mode, only the
LCD icons can be turned on or off.
ADJUST TIME
OK
0 1 : 0 1 A M
RETURN SET
ADJUST TIME
OK
0 1 : 0 1 A M
RETURN SET
0 1 : 0 2 A M
RETURN SET
ADJUST TIME
OK
A
AWB
07 ⁄ 04 ⁄ 03 02:40PM
4 M
N
28/45
4060 U Guide-6L (513353-00) 7/10/03 8:49 PM Page 8