RED ONE QSG - Manual (Page 6)

18. Install media.
• SD MEMORY: Insert supplied SD Memory Card at left front of camera.
• COMPACT FLASH: Insert REDFLASH ™ compact flash (CF) card at left rear of
camera.
• RED DRIVE®: Loosen thumb screws on sides of cradle assembly, slide into
v-blocks in cradle and tighten thumb screws. Connect 90˚ end of cable to RED
DRIVE® and straight end to DRIVE connector on rear of camera.
19. Assemble arm and install in desired location using short stud.
SD MEMORY
LOCATION
INSERTING REDFLASH
ALIGN RED DRIVE SLOTS
WITH RAILS
AND SLIDE DOWNWARD
TURN
THUMB-SCREWS
TO LOCK/UNLOCK
(2 ON EACH SIDE)
RED ARM
SHOWN INSTALLED
ON TOP-MOUNT
ATTACH
POWER CABLE
TO CAMERA
*** TIP***
ONCE LOCKED, ONLY
LOOSEN ONE SIDE TO
LOCK/UNLOCK
TO EASE IN
INSERTION/EXTRACTION