Red epic – RED FOCUS User Manual

Page 14

Text mode
Original mode

AUGUST 17, 2011

RED EPIC

WARNING: THERE IS A METAL PLUG INSTALLED IN THE CAMERA BODY COVERING THE BACK
FOCUS SCREW. THIS PLUG MUST BE REMOVED BEFORE PERFORMING A BACK FOCUS AD-

JUSTMENT. TO REMOVE THE PLUG, USE A T-10 TORX DRIVER.
Back focus is adjusted by turning the back focus adjustment on the top of the camera’s front plate using

a T-10 Torx screwdriver. This screw is indicated by a

Siemens Star

with an arrow pointing to its location.

Back Focus Adjustment Location

1. Remove the screw-in plug located in the back focus adjustment opening using a T-10 Torx driver.
2. Place the camera on a level, stable surface or mount the camera on a tripod.
3. Install RED Focus to the camera PL mount.

A. Remove the camera lens or sensor cover if equipped.
B. Install RED Focus onto the camera in the position shown.
C. Ensure RED Focus is secured to the camera with the camera lock ring.