RED FOCUS User Manual
Page 11
© 2011 RED.COM INC.
AUGUST 17, 2011
10
10
3. Rotate the focus ring a small amount in both directions to ensure it moves freely.
4. Install RED Focus to the camera PL mount.
A. Remove the camera lens or sensor cover if equipped.
B. Install RED Focus onto the camera in the position shown.
C. Ensure RED Focus is secured to the camera with the camera lock ring.
RED Focus Installed Properly on RED ONE Camera
5. Power up the camera.
NOTE: Allow camera to boot up completely.
6. Power up RED Focus. Refer to POWER UP / DOWN.
NOTE: Remember that RED Focus will AUTOMATICALLY power down after 3 minutes. Press the
Red button on the front to power back up.