PS Engineering MB-10 Installation Manual User Manual
Mb b 1 1 0 0

9800 Martel Road
Lenoir City, TN 37772
www.ps-engineering.com
M
M
B
B
1
1
0
0
Document P/N 200-023-0001
Rev. 9, Sept. 2013
Marker Beacon Receiver/Indicator
System Installation and Operation Manual
FAA-Approved TSO, C35d
PS Engineering, Inc. 2013 ©
Copyright Notice
Any reproduction or retransmittal of this publication, or any portion thereof, without the expressed written permission of PS Engi-
neering, Inc. is strictly prohibited. For further information contact the Publications Manager at PS Engineering, Inc., 9800 Martel
Road, Lenoir City, TN 37772. Phone (865) 988-9800, email [email protected].
In certified aircraft, warranty is not valid unless this product is installed by an
Authorized PS Engineering dealer.
Table of contents
Document Outline
- Section I GENERAL INFORMATION
- Section II - Installation
- Section III OPERATION
- Section IV- Warranty and Service
- Appendix A – MB10 Installation Drawings
- Appendix B, J10 Interconnect
- Appendix C- Instructions for FAA Form 337 and continuing ai worthiness
- Appendix D RTCA DO160E Environmental Qualification Form