6equipment supplied, 7equipment required but not supplied, Optional items – PS Engineering PMA8000D Installation Manual User Manual
Page 7: License requirements, 6 equipment supplied, 7 equipment required but not supplied, 8 optional items, 9 license requirements

PS Engineering
PMA8000D Audio Selector Panel and Intercom System
Installation and Operator’s Manual
200-890-0304
Page 1-4
Rev. 6, Oct. 2014
External Lamp Output:
7.5 (±4 VDC unloaded, at maximum brightness) VDC
positive when active, max. current 125 mA
MM Sense:
Active high (4.5 ± 1.0VDC)
1.6
EQUIPMENT SUPPLIED
One ship set includes 2 ea. of the following units:
Model
Description
Part Number
PMA8000D
Stereo Audio Selector Panel with Marker Beacon includes utility jack, Blue-
tooth® interface and Internal Recorder System. This supports three com trans-
ceivers.
Designed specifically for Dual Audio Panel Installation.
2 ea. 050-890-0304
PMA8000D
Same as above, with 5VDC backlighting
2 ea 050-890-0305
PMA8000D
Same as -0304, with Gray Bezel option
2 ea. 050-890-0306
PMA8000D
Same as -0305, with Gray Bezel option
2 ea. 050-890-0307
PMA8000D
Same as -0304, with CVR output
2 ea 050-890-0314
PMA8000D
Same as -0305, with CVR output
2 ea 050-890-0315
PMA8000D
Same as -0306, with CVR output
2 ea. 050-890-0316
PMA8000D
Same as -0307, with CVR output
2 ea. 050-890-0317
PMA8000D
Same as -0304, with Vertical Orientation
2 ea 050-890-0324
PMA8000D
Same as -0305, with Vertical Orientation
2 ea. 050-890-0325
PMA8000D
Same as -0306, with Vertical Orientation
2 ea. 050-890-0326
PMA8000D
Same as -0307, with Vertical Orientation
2 ea 050-890-0327
PMA8000D
Same as -0304, with CVR and Vertical Orientation
2 ea 050-890-0334
PMA8000D
Same as -0305, with CVR output and Vertical Orientation
2 ea. 050-890-0335
PMA8000D
Same as -0306, with CVR output and Vertical Orientation
2 ea. 050-890-0336
PMA8000D
Same as -0307, with CVR output and Vertical Orientation
2 ea. 050-890-0337
PMA8000D Installation Kit: 250-890-0000 (2 kits required for dual installation)
Description
Quantity
Part Number
Installation rack assembly
1
430-890-0040
Rack back plate
1
430-890-0050
44-pin connector kit
2
120-891-2045
Backshell, connector
2
625-025-2465
Backshell Mounting Blocks
2
431-891-0100
4 40 X 7/16 screw w/nylon patch
4
475-440-0007
4 40 X 3/8 screw w/nylon patch
4
475-440-1038
4-40 x ¼” screw with lock washer
2
475-440-0001
Grounding Solder Lug
2
475-009-0001
Cable Clamp
1
625-001-0002
#6-32 x ½” Flat head Philips screw
6
475-632-0012
#6-32 Clip Nut
6
475-630-0002
1.7
EQUIPMENT REQUIRED BUT NOT SUPPLIED
a.
Circuit Breaker: 1 ea; 5 amp PULL TYPE REQUIRED for PMA8000D
b.
Speaker, 4
c.
Headphone Jacks (Stereo, as Required)
d.
Microphone Jacks (as Required)
e.
Headphones, 150
(Stereo), up to 6 as required
f.
Microphones, up to 6 as required
g.
Marker Antenna (75 MHz, VSWR <1:1.5, and appropriate for the airspeed)
h.
Interconnect Wiring
1.8
OPTIONAL ITEMS
a.
Music Patch Cord, 3.5mm to 2.5mm, PS Part Number
425-006-2535
b.
Passenger intercom unit, IntelliPAX, if desired
11636Remote
1.9
LICENSE REQUIREMENTS
None