PS Engineering PMA8000D Installation Manual - Manual (Page 36)

PS Engineering
PMA8000D Audio Selector Panel and Intercom System
Installation and Operator’s Manual
200-890-0304 Page 3-12 Rev. 6, Oct. 2014
Hold button on power up Pairing Code
COM 3 0000 (default)
NAV 1 1234
NAV 2 1111
3.12.2 Power on announcement
If the Intercom or Music Distribution is changed from the factory default, the configuration will be played
when the unit is powered up. To defeat this announcement, press the COM 3 XMT and AUX buttons for
more than two seconds. The feature can be enabled again using the same sequence.
3.13 Internal Recorder and Playback
The PMA8000D comes equipped with an internal recorder. This digital system stores the last incoming
audio from the radio you have selected for transmit. It can store as many of 8 incoming messages, and up to
60 seconds of audio. The pilot and copilot hear the playback. It is also possible to modify the unit to ex-
clude the copilot from the playback, and annunciation playback. Contact PS Engineering, for more details.
Recording is automatic. To play back the last recorded message, press and hold the COM Receive pushbut-
ton associated with the selected radio transmitter for about one (1) second. You can either wait for the mes-
sage to finish playing before accessing the prior message, or cancel the current playback and step backward.
To cancel the playback, press and hold the COM receive playback button for two seconds (2). The next
time the button is pressed for one (1) second, the next earlier message will be heard.
The playback will
stop whenever there is more incoming selected com audio, and the message can be replayed from
the beginning by pressing the selected
COM Receive button again for 1 second
Figure 3-3 Playback Controls