PS Engineering PDA360EX Pilot’s Guide - Manual (Page 10)

Page 10 202-760-0100 PAR100EX Pilot Guide
swer the call from your telephone handset. The PAR100EX exits the tele-
phone mode automatically when the cellular phone hangs up.
In TELEPHONE mode, the pilot microphone and headphones are connected
to the cell phone. The pilot PTT will switch the pilot mic to the selected com
transceiver, and allow continued aircraft communications to continue.
The copilot will also be able to transmit on the other selected radio with his
PTT as well.
Entering the TEL mode connects the telephone to the users as follows:
In ALL intercom mode, all crew and passengers will be heard on the phone
when they speak. Com and other selected radio audio is also heard in the
headsets. If the pilot or copilot pushes the radio PTT, their mic will be trans-
ferred to the selected Com radio. The telephone party will not hear ATC
communications, and vice versa.
In CREW mode, only the pilot and copilot are connected to the telephone.
Passengers will not hear the telephone. The pilot and copilot will also have
transmit capability on the other selected transceiver.
In ISO intercom mode, when the PAR100EX is connected to the Bluetooth
telephone, the pilot position is in the "Phone Booth." Only the pilot will hear
the telephone, and only he will be heard. He will also have access to Com 1
or 2, and will transmit on that radio using the PTT. All selected audio is pro-
vided to the pilot.
NOTE
Because the cell-phone uses an intercom circuit, all stations on that circuit
will lose intercom capability when the cell phone is in use.
WARNING
Federal Communications Commission regulation 47 CFR 22.925 prohibits
the use of 800MHz Cellular handsets in any aircraft that is airborne. Viola-
tion of this rule could result in suspension of service and/or a fine.
Music Muting (9)
There are two SoftMute™ muting circuits. The front panel
"Mute" button has four modes, and controls the Mute func-
tion for music 1. Music 2 muting is controlled by an external
switch, and has two modes.
The SoftMute™ circuit will cut the music out whenever there
is conversation on the radio, the intercom, or both, depending
on the “Mute” mode selected. When that conversation stops,
the music returns to the previous level comfortably, over a
second or so.
The mute mode functions are controlled through sequential pushes of the
Mute button, and include LED indication of the mode selected.