Proto-X FPV - Manual (Page 4)

4
TRANSMITTER MAIN MENU
INPUT KEY FUNCTION
(4)
Move the stick forward or backward to increase or decrease
speed. Move the stick left or right to make the quadcopter roll
left or right to initiate a banked turn.
(8)
Move the stick forward or backward to make the quadcopter
nose point up or down. Move the stick left or right to make the
quadcopter yaw left or right.
9 Aileron trim adjusts for left and right drift.
6 Elevator trim adjusts for forward and backward drift.
4 Rudder trim adjusts for drift of left and right rotation or yaw.
2
Throttle trim normally left at neutral. The lower trim turns
LEDs on and off.
8 Push to ON to turn on the transmitter. Push to OFF to turn off.
7
Move the stick forward or backward to make the quadcopter
move forward or backward. Move the stick left or right to make
the quadcopter drift sideways left or right.
3
5
MODE/ CONTROL
MODE 1
THROTTLE /AILERON STICK
MODE 1
ELEVATOR/RUDDER STICK
AILERON TRIM
ELEVATOR TRIM
RUDDER TRIM
THROTTLE TRIM
POWER SWITCH
MODE 2
ELEVATOR/AILERON STICK
MODE 2
THROTTLE/RUDDER STICK
RECORDING Press the Recording button for 1 second to start or stop
Move the stick forward or backward to make the quadcopter
ascend or descend. Move the stick left or right to rotate the
quadcopter’s fuselage left or right.