Proheat T-II - Manual (Page 9)

7
When power is fi rst applied to the Timer or if
power is lost then restored, you will see the
above segment test screen along with the
Red & Green LED’s illuminated for 2 seconds.
The screen will then change to one of the
continuously fl ashing Clock screens, shown left
(Based on the Clock Mode dip switch #1, factory
preset: 12 hour mode) and will stay this way
until the Time of Day is set.
If the Lockout Mode dip switch #4 is in the
ENABLED position, you may see T1 and/or T2
and the Green LED illuminated (if previously
enabled). See “Lockout Mode” page 12.
Power Up
T-II
12 Hour Mode
24 Hour Mode
NOTICE