Proheat T-II - Manual (Page 18)

16
T-II
Timed Heater Operation
Single Timer Single Day Mode
STEP 1 Press “Timer” to activate the T1 program
(Green Timer LED will go on). The Heater will
switch on at the set T1 program time and run
for 1 or 3 hours (see page 4 Timer Run Mode
settings) then switch off. The Green Timer
LED will now be out. To set Timer T1 again for
the same time and day repeat step 1.
STEP 2 Press “Timer” to deactivate and cancel the
current T1 program (Green Timer LED will
go out).
If “Timer” is active and “Manual” is pressed,
“Timer” is de-activated and green LED goes out.
When the heater has been turned on by the
“T1 Timer” in single timer mode, the heater
can be turned off by pressing either “Manual”
or “Timer”. Both red and green LED’s will go
out. If Lockout Mode is ENABLED only the
“Manual” button will work.